FANOUT BUFFER
- Electrical logic input thresholds adjustable from -4V to +4VInput-to-output bank assignment is routable without moving cabling
- Programmable logic out bank voltages adjustable from -3.6V to +5V, 50 ? source
- 850nm, 1310nm or 1550nm fiberoptic input options available with ST or FC connectors and calibrated 1V/mW analog front panel monitor output
- Stable, ultra-low jitter, sub 350ps output edge transition times
The P730 features two input banks that are user-routable to two output banks, each consisting of four parallel buffered electrical outputs. Input and output levels are independently adjustable enabling compatibility with CMOS, TTL, CMOS, LVDS, NECL, PECL, NIM and sine wave systems. Fiberoptic inputs are optionally available, expanding electrical signal translation to include optical-to-electrical conversion, galvanic isolation and 1244.16 Mb/s SONET OC-24 compatibility. A fully DC-coupled signal path maintains signal integrity to greater than 1GHz pulse repetition rates.
The P730 is compatible with Highland Technology J-series photonic, T-series timing, P-series benchtop and V-series VME products.
| FUNCTION | 1:8 or dual 1:4 universal fanout | |
| PACKAGING | 7.0 x 5.0 x 2.25 inches aluminum enclosure | |
| ELECTRICAL INPUTS (E0, E1) | Input voltage range: ±6V 50-ohm termination |
|
| ELECTRICAL LEVEL THRESHOLD | ±4 volts | |
| OPTICAL INPUTS (F0, F1) |
Maximum peak signal: 2 mW Minimum signal power: 100 uW |
|
| CALIBRATED WAVELENGTH |
P730-1: 850nm ST Connector P730-3: 1310nm ST Connector P730-5: 1550nm ST Connector P730-13: 1310nm FC Connector P730-15: 1550nm FC Connector |
|
| OPTICAL LEVEL THRESHOLD |
2 mW maximum 100 uW minimum |
|
| OPTICAL MONITOR OUTPUTS |
Monitor scaling 0.1 V/mW ±10% into 50 ohms Bandwidth: 1 GHz nominal |
|
| OUTPUTS (X0 X3, Y0 Y3) | Two independent banks of four outputs each. Maximum unloaded output voltage: +5 V Minimum unloaded output voltage: -3.6 V Maximum unloaded output swing: 5 V peak-to-peak Maximum rise/fall time: 350 ps 50 ohm source impedance |
|
| INSERTION DELAY | 3 ns typical | |
| JITTER | Random: 8 ps RMS, max | |
| OUTPUT SKEW | Within Bank: < 400 ps Bank X to Bank Y: < 600 ps |
|
| MINIMUM PULSE WIDTH | 500 ps | |
| BANDWIDTH | 1 GHz analog, 2 Gb/s NRZ | |
| POWER | +15 to +24V, 26 Watts typ. Highland Technology J-24 Universal AC adapter supplied |
|
| TEMPERATURE | 0-50°C operating; -20 to 80°C storage, non-condensing | |
| COMPLIANCE | Designed to meet UL/FCC/CE requirements |